Yaskawa Motor Encoder Maintenance Process Check whether the drive waveform of the inverter is normal, which is also an important reason why the current limit protection is applied to the controller. If you have any related questions, please consult us.

Selection Skills of Yaskawa Robot Position Encoder The calculation method of the position resolution in the follow-up file in the Yaskawa Robot Manual is:

If you don’t see it, you regret the Yaskawa drive alarm A.Cb failure reason The drive is one of the indispensable machines for CNC equipment, but sometimes it will fail. So, do you know why this failure occurs? There are some Yaskawa driver alarm A.Cb failure reasons that you regret if you don't read it. Would you like to see it?

Yaskawa robot servo driver alarm codes and troubleshooting methods

Yaskawa Servo Drive Alarm Code and Troubleshooting

Draw rope displacement sensor, also known as draw rope sensor, draw rope electronic ruler, draw rope encoder The rope displacement sensor is also called rope sensor, rope electronic ruler, and rope encoder. The rope displacement sensor is an exquisite structure of the linear displacement sensor.

Roller encoder The roller encoder consists of a photoelectric code disc with a shaft in the center, on which there are circular and dark engraved lines, and is read by photoelectric transmitter and receiver devices to obtain four sets of sine wave signals combined into A, B, C, D, each A sine wave has a phase difference of 90 degrees (relative to a cycle of 360 degrees).

The electronic hand wheel is the manual pulse generator (Manual Pulse Generator, also known as the hand wheel, hand pulse, hand pulse generator). Electronic hand wheel is the manual pulse generator (Manual Pulse Generator, also known as hand wheel, MPG, hand arterial wave generator, etc.), used for teaching CNC mechanical work origin setting, step fine adjustment and interrupt insertion etc. , In addition, electronic handwheels are widely used in printing machinery.

Injection molding machine encoder The encoder of the injection molding machine consists of a photoelectric code disc with a shaft in the center, on which there are circular and dark engraved lines, and is read by photoelectric transmitting and receiving devices to obtain four sets of sine wave signals combined into A, B, C, D, Each sine wave has a phase difference of 90 degrees (relative to a cycle of 360 degrees).

Bending machine encoder The encoder of the bending machine consists of a photoelectric code disk with a shaft in the center, on which there are circular and dark engraved lines, which are read by photoelectric transmitting and receiving devices, and obtain four sets of sine wave signals combined into A, B, C, D , Each sine wave has a phase difference of 90 degrees (relative to a cycle of 360 degrees).