The use of ifm OGD580 laser ranging sensor In addition, Pilz also has PSENgate/PSENlock series products, which have more powerful safety door functions. If you are interested, you can go to the official website to see.

How to use SIRIUS 3RN2 relay to protect the motor from overheating Motors, especially those running in explosion-proof areas, are very important to protect them from overheating. Overheating protection can be divided into two ways:

The role of rotary encoder to measure the principle of motor speed The function of the rotary encoder The principle of measuring the speed of the motor The function of the rotary encoder is to measure the speed of the motor. The speed measurement signal of the rotary encoder can be transmitted to the frequency converter or the PLC.

About the instructions for the use of Yaskawa encoder UTSIH-B17CK The Yaskawa encoder UTSIH-B17CK is a rotary sensor that converts the rotational displacement into a series of digital pulse signals. These pulses can be used to control the angular displacement. If the encoder is combined with a gear pin or screw screw, it can also be used for measurement Linear displacement.

Application example PNOZ s5 safety relay monitoring safety door switch In the previous article, we introduced Pilz safety relay PNOZ s5. Today in this article, we will give an application example: using PNOZ s5 to monitor safety door switches. This article includes the following topics:

S7-200 SMART Motion Control Course hardware environment and electrical schematic diagram "S7-200 SMART Motion Control Stepping Motor" In this article, we introduce the hardware environment and electrical schematic diagrams used in the next course, which are the basis for subsequent programming and debugging.

Instructions for use of Pilz safety relay PNOZ s5 In view of the questions raised by the back-end friends, in this article today I want to introduce the use of Pilz safety relay PNOZ s5. This article mainly includes the following topics:

In-depth study of PROFIdrive drive control protocol (2) In the previous article, we introduced PROFIdrive standard messages 1, 2 and 3. Today in this article we will introduce standard messages 4 and 20, and introduce the control word STW1 and status word ZSW1.

Learn PROFIdrive drive control protocol (1) The previous article on S7-1200 motion control has said: According to the different connection drive modes, S7-1200 has three motion control modes, namely: PTO, analog and PROFIdrive protocol. The PROFIdrive protocol is widely used in Siemens motion control.

Get to know the inputoutput modules of the Festo CPX electrical terminal Festo CPX electrical terminals are used a lot in the field. In the previous article, we have introduced its bus node module CPX-FB33 (how to use the diagnostic function of Festo bus node CPX-FB33?).