About the instructions for the use of Yaskawa encoder UTSIH-B17CK

Keywords: encoder motor angular displacement linear displacement

Abstract: The Yaskawa encoder UTSIH-B17CK is a rotary sensor that converts the rotation displacement into a series of digital pulse signals. These pulses can be used to control the angular displacement. If the encoder is combined with a gear pin or a spiral screw, it can also be used For measuring linear displacement.

1. The working principle and function of Yaskawa servo motor encoder UTSIH-B17CK:

It is a rotary sensor that converts rotational displacement into a series of digital pulse signals. These pulses can be used to control angular displacement. If the encoder is combined with a gear pin or screw screw, it can also be used to measure linear displacement.

2. The purpose and signal output of UTSIH-B17CK encoder:

After the electrical signal is generated, it is processed by the digital control CNC, programmable logic controller PLC, control system, etc. These sensors are mainly used in the following areas: machine tools, material processing, motor feedback systems, and measurement and control equipment. The conversion of angular displacement in the ELTRA encoder uses the photoelectric scanning principle. The reading system is based on the rotation of the radial indexing plate. The indexing of UTIH-B20FK is composed of alternating light-transmitting windows and opaque windows. This system all uses an infrared light source to illuminate vertically, so that the light projects the image on the plate onto the surface of the receiver. The MFE2500P8NCA receiver is covered with a layer of grating, called a collimator, which has the same window as the optical disc. The job of the UTSIH-B17CK receiver is to feel the light changes produced by the rotation of the disc, and then convert the light changes into corresponding electrical changes. Generally, a rotary encoder can also get a speed signal, which has to be fed back to the inverter to adjust the output data of the inverter.

2.2 UTSIH-B17CK failure phenomenon:

When the rotary encoder is broken (no output), the inverter cannot work normally and becomes very slow, and after a while, the inverter protects and displays "PG disconnect"...the combined action can only take effect. SBN-4096-6ME wants to make the electrical signal rise to a higher level and generate a square wave pulse without any interference, which must be processed by an electronic circuit. Encoder pg wiring and parameters The connection mode between the vector inverter and the encoder pg must correspond to the encoder pg model. Generally speaking, there are three types of encoder PG: differential output, open-collector output and push-pull output. The signal transmission method must take into account the interface of the inverter PG card, so choose the appropriate pg card model or set it reasonably.

2.3 Pulse classification of Yaskawa servo UTSIH-B17CK encoder:

UTTSIH-B17CK Absolute Pulse Encoder: APC Incremental Pulse Encoder: SPC Both are generally used in speed control or position control system detection elements. Rotary encoder is a device used to measure speed. MFE2500P8NV is divided into single output and dual output. Technical parameters mainly include the number of pulses per revolution (dozens to thousands of them), and power supply voltage. Single output means that the output of the rotary encoder is a set of pulses, while the dual output rotary encoder outputs two sets of pulses with a phase difference of 90 degrees. The two sets of pulses can not only measure the speed, but also determine the direction of rotation.

2.4 The encoder model of Yaskawa UTSIH-B17CK servo motor is as follows:

There are so many models that are not listed, please feel free to contact us if you need it! /TEL/1/3/9/1/8/8/6/4/4/7/3////

SGMGH-05ACA61	SGMGH-05ACB61	SGMGH-05ACA21	SGMGH-05ACB21	SGMGH-05ACA6C
SGMGH-09ACA61	SGMGH-09ACB61	SGMGH-09ACA21	SGMGH-09ACB21	SGMGH-09ACA6C
SGMGH-09DCA21	SGMGH-09DCA61	SGMGH-09DCB61	SGMGH-09DCB21	SGMGH-09DCA6C
SSGMGH-1ADCA61	SGMGH-1AACA21	SGMGH-55ACA21	SGMGH-13ACA6C	SGMGH-13ACA61
SGMGH-1ADCB61	SGMGH-1AACB21	SGMGH-55ACB21	SGMGH-13DCA61	SGMGH-13ACB61
SGMGH-1ADCA21	SGMGH-1AACA6C	SGMGH-55ACA6C	SGMGH-30ACB21	SGMGH-13ACA21
SGMGH-1ADCB21	SGMGH-1AACA6S	SGMGH-1AACB61	SGMGH-30DCA61	SGMGH-13ACB21

 

3. After-sales guarantee and replacement of Yaskawa encoders:

3.1 If the product has any problems within the warranty period, it can be sent back to our company for repair, testing and replacement!

3.2 If a customer purchases a product from our company and needs to be replaced within the specified time limit, the product will be returned and exchanged without affecting the company's product for the second sale!

3.3 For customers who purchase encoders from our company, after the accumulated amount reaches a certain amount, the company will give a red envelope WeChat reward!

4. Conclusion:

Our company has a professional technical team to provide reliable and efficient technical services and overall automation solutions for the automation process control needs of various industries. Has developed, designed, and transformed many automation equipment and advanced automation for customers in product performance testing, automated production lines, printing and dyeing machinery, air conditioning equipment, glass machinery, electronic equipment, spraying, teaching equipment, wire and cable, energy-saving equipment transformation, etc. Control system, and provide thoughtful technical support and one-stop service before, during and after sales, which are well received by customers. In the new century, we will continue to strive for excellence and serve our customers; we will make unremitting efforts for the promotion and application of automation technology in China, fundamentally create value for customers, and achieve expected results. We will become the most professional and most professional Fast and perfect sales and value-added service provider. With the best price and good reputation, we look forward to sincere cooperation with you!