Angle encoder

The angle encoder consists of a photoelectric code disc with a shaft in the center, on which there are circular and dark engraved lines, which are read by photoelectric transmitting and receiving devices, and obtain four sets of sine wave signals combined into A, B, C, D, each A sine wave has a phase difference of 90 degrees (relative to a cycle of 360 degrees). The C and D signals are reversed and superimposed on the A and B phases to enhance the stable signal; in addition, a Z-phase pulse is output per revolution to represent Zero reference position. Since the phases A and B differ by 90 degrees, the encoder's forward and reverse rotation can be judged by comparing the phase A or the B phase. The zero reference position of the encoder can be obtained through the zero pulse.

The materials of the angle encoder code disc are glass, metal, plastic. The glass code disc is deposited on the glass with very thin scribe lines, which has good thermal stability and high precision. The metal code disc is directly engraved with through and impassable lines and is not easily broken. , But because the metal has a certain thickness, the accuracy is limited, and its thermal stability is one order of magnitude worse than that of glass. The plastic code wheel is economical and its cost is low, but the accuracy, thermal stability, and life are worse. some.

Resolution—The number of open or dark engraved lines provided by the angle encoder per 360 degree rotation is called resolution, which is also called resolution indexing, or directly called the number of lines, generally 5 to 10,000 lines per revolution.

okplazas.com specializes in selling all kinds of angle encoders, and can provide angle encoder selection, angle encoder quotation, angle encoder installation instructions, angle encoder maintenance and other services, welcome to consult!