Automatic door encoder

The automatic door encoder consists of a photoelectric code disc with a shaft in the center, on which there are circular and dark engraved lines, which are read by photoelectric transmitting and receiving devices, and obtain four groups of sine wave signals combined into A, B, C, D, Each sine wave has a phase difference of 90 degrees (relative to a cycle of 360 degrees). The C and D signals are reversed and superimposed on the A and B phases to enhance the stable signal; in addition, a Z-phase pulse is output per revolution. Represents the zero reference position. Since the phases A and B differ by 90 degrees, the encoder's forward and reverse rotation can be judged by comparing the phase A or the B phase. The zero reference position of the encoder can be obtained through the zero pulse.

The material of the code disc of the automatic door encoder includes glass, metal and plastic. The glass code disc is a thin engraved line deposited on the glass, which has good thermal stability and high precision. It is not easy to directly engrave the metal code disc with and without pass. But because the metal has a certain thickness, the accuracy is limited, and its thermal stability is an order of magnitude worse than that of glass. The plastic code disc is economical, and its cost is low, but the accuracy, thermal stability, and life are required. Worse.

Resolution—The number of open or dark engraved lines provided by the automatic door encoder per 360 degrees of rotation is called resolution, also called resolution indexing, or directly called the number of lines, generally 5 to 10,000 lines per revolution.

okplazas.com specializes in selling all kinds of automatic door encoders, and can provide automatic door encoder selection, automatic door encoder quotation, automatic door encoder installation guidance, automatic door encoder maintenance and other services, welcome to consult!