Come to okplazas.com and use genuine Pepperl+Fuchs photoelectric sensors. Why are you still hesitating

P+F Pepperl+Fuchs photoelectric sensor, commonly known as photoelectric switch. Its role is widely used in industrial measurement and other work. The composition of the photoelectric sensor should be characterized as: the composition of the photoelectric sensor, which is composed of a light source, an optical path, and a photoelectric element. The non-electricity of the photoelectric sensor that changes in the amount of light can be converted into other non-electricity that changes in the amount of light. The application of photoelectric sensors can be summarized into four basic forms, namely, radiation (direct), absorption, shading, and reflection. Features of photoelectric sensor: non-contact, fast response, reliable performance.

The P+F Pepperl+Fuchs photoelectric sensor generates photoelectric effect after being irradiated by visible light, converts the light signal into an electrical signal output, and is an important sensitive device with a wide range of applications. The photoelectric measurement does not directly contact with the measured object, and the quality of the beam is approximately zero.

There is no friction and almost no pressure on the measured object during the measurement. Therefore, in many applications, photoelectric sensors have obvious advantages over other sensors. The disadvantage is that in some applications, optical devices and electronic devices are more expensive and require higher environmental conditions for measurement. It is a physical phenomenon in which light irradiates certain substances to change the conductive properties of the substance. It can be divided into three types: external photoelectric effect, internal photoelectric effect and photovoltaic effect. The photoelectric sensor through-beam photoelectric switch is composed of a transmitter and a receiver. The two are separated from each other in structure. When the beam is interrupted, a switch signal change will occur. The typical way is the photoelectric switch on the same axis. Can be separated by up to 50 meters. Photoelectric switch type proximity switches are widely used in automatic counting, safety protection, automatic alarm and limit control.