Daily maintenance and cleaning methods in the work of ATOS control valve

Daily maintenance and cleaning methods in the work of ATOS control valve

Determination of the type of ATOS control valve actuator:

After determining the output power of the actuator, select the corresponding actuator according to the requirements of the process environment. For explosion-proof requirements on site, pneumatic actuators should be used. From the perspective of energy saving, electric actuators should be used as much as possible. If the adjustment accuracy is high, hydraulic actuators can be selected. Such as the speed adjustment of the turbine of the power plant, the temperature adjustment control of the catalytic device reactor of the oil refinery, etc. Make the function of the control valve more perfect, more reasonable and more complete.

The ATOS solenoid valve is therefore distributed in every corner of the city. The length of the water supply pipe network is as little as hundreds of kilometers and as many as thousands of kilometers. The irreplaceability of water and the necessity of people's survival determine the importance of the safe operation of the water supply network. However, due to various subjective and objective reasons, pipelines often have some failures, pipeline networks are always updated and reconstructed, and water users often have to increase or decrease.

Therefore, it is inevitable to avoid water cuts in local pipeline sections. In order to reduce the scope of water cut, it is very necessary to install control valves in the pipe network appropriately. Therefore, in the water supply pipe network of a city, there are thousands of valves, and they are randomly distributed under the city streets.

The daily maintenance method of ATOS superimposed relief valve SHMP type:

1. Keep the valve clean: no dirt, adhesion, rust, etc.;

2. When there is leakage: Do not increase the load to reduce leakage;

3. Regular inspection and cleaning, grinding, testing, and adjustment must be made

The response time of ATOS solenoid valve can be as short as a few milliseconds, even the pilot solenoid valve can be controlled within tens of milliseconds. Because of its self-contained circuit, it is more sensitive than other automatic control valves. The properly designed Atos ATOS solenoid valve coil has low power consumption and is an energy-saving product; it can also be able to automatically maintain the valve position by triggering the action, and it does not consume electricity at all. The solenoid valve is small in size, which saves space and is light and beautiful.