Daily maintenance and maintenance methods of absolute encoder

Absolute encoder is a kind of rotary encoder. Its characteristic is: absolute encoder is determined by mechanical position. It does not need to remember, do not need to find reference point, and does not need to keep counting. When do you need to know the position and when Just go to read its location. In this way, the anti-interference characteristics of the encoder and the reliability of the data are greatly improved.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

Daily maintenance work of absolute encoder

1. Regular inspection: Regular inspection work is carried out on the mechanical part of the absolute value encoder, usually once a month, the content of the inspection work is mainly the inspection of the mechanical connection point to see if it is misaligned and so on.

2. Do not adjust electronic control equipment at will: Absolute encoders are precision instruments. The electronic control equipment is a component. The power supply parameter of the electronic control equipment component is 380 volts, which is 160 volts higher than the general voltage of 220 volts. To ensure that the absolute encoder can be used normally, and on the other hand to ensure the safety of personnel, the operator should not arbitrarily adjust the electronic control equipment, especially the interlocking device.

3. Regular replacement of hydraulic oil: The hydraulic oil needs to be replaced regularly. The replacement period is generally twice a year. If the hydraulic oil is not deteriorated, it can be replaced once a year.

4.Professionals operate electrical equipment: The use of absolute encoders needs to be used with controllers, electronic control systems and other equipment. These equipment have high power and different operation methods, which will not only cause damage to the body, but also cause electric shock, so The operation of electrical equipment must be maintained by professionals.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

Daily maintenance of absolute encoder

1. The mechanical part needs to be checked once a month whether the mechanical connection and the matching part of the system are loose due to time running. Check whether the connecting screws of the profile bracket are tightened.

2. The electrical parts need 380V voltage through the electrical components. Untrained personnel are strictly prohibited to operate, open the control box, and beware of electric shock.

3. It is not allowed to arbitrarily adjust the interlocking device of the electric control equipment, damage or move the position of each limit stop at will.

4. All hydraulic components are not allowed to adjust or replace without permission of the competent authority.

5. When the hydraulic system fails, it is not allowed to move without authorization, and the maintenance department should be notified immediately to analyze the cause and eliminate it.

6. The hydraulic oil should be replaced once every six months when the hydraulic system is used for the first time, and the hydraulic oil should be replaced once a year thereafter.

7. Regularly check the components and accessories of the hydraulic system.

To stabilize the daily operation of the absolute value encoder, not only need to understand how the equipment is used, but also pay attention to the daily maintenance and maintenance during the use of the equipment. Doing both, I believe it will be of greater help to improve the use value of the absolute value encoder .

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.