HAECO encoderHAECO encoder

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

The HAECO encoder consists of a photoelectric code disk with a shaft in the center, on which there are circular and dark engraved lines, and is read by photoelectric transmitter and receiver devices to obtain four groups of sine wave signals combined into A, B, C, D, Each sine wave has a phase difference of 90 degrees (relative to a cycle of 360 degrees). The C and D signals are reversed and superimposed on the A and B phases to enhance the stable signal; in addition, a Z-phase pulse is output per revolution. Represents the zero reference position. Since the phases A and B are different by 90 degrees, the encoder's forward and reverse rotation can be judged by comparing whether the A phase is the first or the B phase. The zero reference position of the encoder can be obtained through the zero pulse.

The materials of HAECO encoder code discs include glass, metal and plastic. The glass code disc is made of thin engraved lines deposited on the glass. It has good thermal stability and high precision. The metal code disc is directly engraved with and without pass, which is not easy. But because the metal has a certain thickness, the accuracy is limited, and its thermal stability is an order of magnitude worse than that of glass. The plastic code disc is economical, and its cost is low, but accuracy, thermal stability, and life are required. Worse.

Resolution-The number of open or dark engraved lines provided by the HAECO encoder per 360 degree rotation is called resolution, which is also called resolution indexing, or directly called the number of lines, generally at 5 to 10,000 lines per revolution.

okplazas.com specializes in the production and sales of various HAECO encoders, and can provide HAECO encoder selection, HAECO encoder quotation, HAECO encoder installation instructions, HAECO encoder maintenance and other services, welcome to consult!