Is the number of gold cylinders as large as possible

Is the number of gold cylinders as large as possible? I believe you are very confused about this, and today I will answer it for you.

In order to understand this problem, we must first know, what does the gold cylinder do? Internal combustion engine The internal combustion engine powers the car through repeated manual combustion, and the four working stages of the current four-stroke engine are: intake, compression, manual, and exhaust.

If each cylinder has a certain displacement, the more cylinders, the greater the torque of the engine, which means that the more powerful the engine, the faster the car can run.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

Now as long as the car runs fast, you don’t have to add more cylinders to the engine. For example, add some "power" to the engine, such as turbocharging or supercharging, so that the engine can suck in more air and increase power. Yes, it is precisely because of these supercharging technologies that automakers will abandon more cylinder-count engines in favor of more four-cylinder turbocharged engines.

Even so, there are still many luxury brands of engines that insist on using large-displacement, multi-cylinder engines. In addition to the hope that the engine sounds more beautiful, there is actually a very important point, which is to make the car engine run more smoothly.

Therefore, in the next article, I will focus on distinguishing three-cylinder machines, four-cylinder machines, and six-cylinder machines.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

I wonder if you have noticed a detail, why most cars have at least four cylinders? Almost never seen a three-cylinder car engine?

In order to achieve the most basic balance between engine noise and vibration, a four-cylinder engine is a physical bottleneck. As long as the number of cylinders in the engine is less than four, the roughness of the engine during operation will be doubled, and the gain is not worth the loss.

Going back to the four strokes of the engine mentioned above, in the cylinder we see, the cylinder is doing these four things. The vibration of the car engine is caused by these four things (only the work phase will produce vibration)