Maintenance of rope encoderSome points of attention for maintenance

Maintenance of rope encoder|Some points of attention for maintenance

What kind of maintenance is needed for the rope encoder in use? What failures will occur in the use of the rope encoder? How to repair after failure? Today in the editor of okplazas.com, I will take everyone to understand the precautions in the maintenance and repair of the rope encoder.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

1. The encoder is the core component of the rope encoder, and it is a precision component, so it will be affected by the environment during use. The first thing we must think of is dustproof and shockproof. Our rope encoder itself has dustproof function, but it is easy to accumulate dust near the outlet after using it for a long time. If possible, it is best to wipe it regularly. If it is anti-vibration, we can install an anti-vibration pad to reduce the vibration in a relatively large vibration environment.

2. There are also precautions for the installation of the rope encoder. The most important thing is to determine the position during installation. It is best to leave a safe distance and install it vertically. Small ranges can also be installed horizontally. Don't use it over the range, as it will easily break the wire rope.

3. The body of the rope displacement sensor must be firmly fixed and not loose. If it is loose, the measurement may be inaccurate.

The problems that are prone to occur in the use of the four-rope displacement sensor, the general problems are inaccurate measurement data, large value fluctuations, or no value display, etc. If these problems occur, you can check the wiring first. The wiring must be correct according to our wiring diagram wiring. If the problem cannot be solved, you can communicate with our technicians and we will give a solution in time. If it cannot be solved, you can send it back to our factory for repair.

The above is the maintenance method of the rope encoder compiled by okplazas.com editor, as well as the prone problems and solutions to the problem. The editor of okplazas.com organizes some technical issues and publishes articles every day.