okplazas.com's new Pepperl+Fuchs encoders fully support spot purchases

Pepperl+Fuchs encoder is one of okplazas.com's largest-selling encoder brand products. In the field of industrial automation, the encoder compiles and converts the signal or data into a signal form that can be used for communication, transmission and storage. It is widely used to measure angle, position, speed and angular velocity, convert to electrical signal, programmable logic controller, etc. Encoder is a device that converts angular displacement or linear displacement into electrical signals. When the rotary shaft of the incremental encoder rotates, there is a corresponding pulse output. The determination of the rotation direction and the increase or decrease of the number of pulses are realized by the direction circuit and counter at the rear. The starting point of counting can be set arbitrarily, which can realize unlimited accumulation and measurement of multiple circles.

There are two types of rotary Pepperl+Fuchs encoders. One is how many pulse signals are transmitted in one revolution, the faster the pulse, the more pulses; the other is how much voltage is transmitted at what speed. The faster the voltage, the higher the voltage. We can use 24V DC power supply when checking whether the encoder is repaired or replaced. A multimeter. First supply 24V to the encoder, and then use a digital multimeter to connect one of the test leads to the power supply of the encoder, and the other test lead to any one of the phases, and rotate the encoder. It is good to see that the multimeter has a pulse voltage output encoder. The feedback phenomenon of Pepperl+Fuchs encoder, 1000-line encoder If the encoder rotates half a turn, the encoder outputs 500 pulses, and the encoder rotates 1/4 turn, the encoder outputs 250 pulses. The index to measure the encoder is: for the same source, the reduction quality when the volume after encoding is approximately the same, or the volume size when the quality is approximately the same. In addition, video coding and audio coding are two completely different things. Under normal circumstances, the spiral encoder is still used more.