okplazas.com recommends Pepperl+Fuchs encoders for you!

Encoders are also used as rotary sensors with digital pulse signals by some people. These pulses can be used to control angular displacement. If the encoder is combined with gears or spiral screws, it can also be used to measure linear displacement. Dimensions: single-shaft, hollow, double-shaft, and other special specifications. Environmental characteristics: Determine whether it is used in room temperature or low temperature, high temperature, and whether there is dust, cotton wool, oil, oil and gas, iron filings and other special environments in the on-site environment. Users can choose the appropriate Pepperl+Fuchs encoder product according to the use environment.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

Pepperl+Fuchs encoder

The absolute encoder reduces the calculation task of the controller and reduces the cost of other additional input components. In addition, after the power supply is started or the power supply fails, no reference drive is required, and the current accurate position can be obtained. Parallel encoders transmit data through several power lines while serial encoders transmit data through standard interfaces and protocols. The P+F encoder has much higher accuracy and reliability than the simulated tachometer. However, the encoder also has weaknesses. Its axial and radial bearing forces are limited, even small. Compared to tachometer. However, the seismic strength of the code itself is relatively high. As a tool for compiling and converting signals or data in the field of industrial automation, encoders are used to measure angle, position, speed and angular velocity, convert them into electrical signals, and programmable logic controllers. The use and maintenance of the encoder require careful maintenance. If you find a problem, you can use an oscilloscope or a dedicated encoder to test the instrument. For example, a multimeter can be used for basic diagnosis, detecting power supply status and low-frequency pulse output. Further testing must be completed with the help of an oscilloscope under the guidance of professionals, or wechat: +0086-13689242098 to consult Pepperl+Fuchs encoder customer service personnel.