Open-pit shearer manipulator arm inclination sensor

Open-pit coal mining machine, as its name implies, is a mining machine for mining open-pit mines. In order to ensure the working safety of the coal washing machine, the chassis of the entire equipment needs to be leveled before work to ensure construction safety. A QXJ2 type two-dimensional inclination sensor is installed to measure the inclination angle of the chassis in all directions, and the angle output signal is sent to the PLC to drive the hydraulic cylinder to achieve the level of the chassis. The angle measurement of the arm is used to calculate the lifting height and prevent property damage and personal injury caused by the over-lifting of the entire equipment.

The open-pit mining machine works in a high temperature, high dust, and corrosive environment for a long time, and the sensor acts as the sensor of the mining machine. If there is a problem with the sensor, you will have a great impression of work efficiency and safety. QXJ2 type two The dimensional inclination sensor transmits the non-contact magnetic sensitive signal, the permanent magnet and the MR element are non-contact, non-contact, non-wear, non-contact electrical noise, and can be applied to various harsh environments such as water, oil, steam, dust, etc., with high sensitivity. Long lifespan, one tops the past five.