Original authentic P+F Pepperl+Fuchs Excellent quality and excellent service okplazas.com serves millions of users

The P+F Pepperl+Fuchs encoder compiles and converts the signal or data into a signal form that can be used for communication, transmission and storage. It is used for speed, position, and detection feedback. Such as the spindle encoder: feedback the actual speed of the spindle; the detection element is mainly used to detect the angular position of the motor and can be converted into a linear running distance. Of course, the motor speed can also be calculated by calculating the number of pulses per unit time, whether it is used for detection Speed or position-both are for precise control.

The encoder compiles the decimal number into a binary number and outputs it. Encoders all have resolution, that is, they can only measure a certain range of distances. For example, if you want to measure a distance of 1 kilometer, you cannot measure if the resolution is not enough. Achieve a distance of 10 meters from the original place, then return to the original place, continue to walk another 10 meters, and then return to the original place, and so on. The resolution cannot determine the length. The resolution is the number of pulses that can be sent for one revolution, and it is the parameter that determines the minimum measurement. When the running time is long, the encoder will produce errors. At this time, it needs to be corrected. During the correction, a certain value is sent to the encoder or FM module to turn it into a measured value to achieve the purpose of correction. Where high measurement accuracy is required, You have to calibrate it every time you use it. The maximum length is not only dependent on the encoder, but also depends on your mechanical structure, and the conclusion must be based on the actual situation. Welcome to consult okplazas.com P+F Pepperl+Fuchs encoder technical consultant, and welcome new users and friends to inquire for purchase and consultation!