P+F Pepperl+Fuchs encoder is more secure with genuine products

P+F Pepperl+Fuchs can be divided into optical, magnetic, inductive and capacitive. The characteristic of the rotary encoder is that when it can be directly connected to the rotating shaft, the number of rotations can be measured, that is, a small number of pulse signals will be sent for each rotation, so that the number of rotations can be calculated according to the number of pulses.

P+F Pepperl+Fuchs encoders are not only used in electromechanical equipment, but also in the technology industry. It has a wide range of applications in non-contact rotation position detection, robotics, and automobile steering wheel position detection. Usually an incremental encoder is used. The output pulse signal of the rotary encoder can be directly input to the PLC, and the pulse signal of the PLC is counted by the high-speed counter of the PLC to obtain the measurement result. Different types of rotary encoders have different phase numbers of output pulses. When the encoder is connected to the counter, the number of turns = the number of pulses on the side/the number of inherent pulses. This is a general spin knitting. The wheel type can directly measure the distance traveled by the object. The encoder is used for the vector control of the inverter. When there is a problem, the low-speed torque of the inverter becomes smaller and the fluctuation becomes larger during leveling. The problem mentioned by the host may occur in the leveling. Whether there is any problem with the encoder, you can use an oscilloscope to find out, or use a frequency converter to monitor it. Pepperl+Fuchs encoders have strong anti-interference, high speed, fast response, dust-proof, oil-proof, and high-level of anti-vibration.