Pepperl+Fuchs Surge Protector A powerful tool for industrial production safety

The type and structure of P+F Pepperl+Fuchs surge protector are different for different purposes. The basic components used in surge protectors are: discharge gap, gas-filled discharge tube, varistor, suppression diode and choke coil Wait. It is an indispensable device in the lightning protection of electronic equipment. The function of the protector is to limit the instantaneous overvoltage that enters the power line and signal transmission line to the voltage range that the equipment or system can withstand, and let the powerful current leak into the ground to protect the protected equipment or system from impact.

The P+F Pepperl+Fuchs surge protector prevents the damage to the equipment caused by overvoltage. We can install surge protectors to protect it. It can be divided into three categories: power line protection, signal line protection, and antenna feeder line protection. When using series-parallel power supply lightning protection, the filter is used as a combination of decoupling devices for lightning protection, which is suitable for various applications. In some extreme cases, the installation of lightning protection devices will increase the possibility of equipment damage and must be prevented; this kind of situation occurs. To protect several lines, the lightning protector on one line fails or the response speed is too slow. This may turn common mode interference into differential mode interference and damage the equipment, requiring multi-level protection and attention to the maintenance of lightning protection devices. The ground wire of the lightning protection device is not connected to the protection ground of the protected equipment, that is, a separate lightning protection ground is adopted. The function of the surge protector is to protect the main switch from high current, the surge protector will play a role in discharging to the ground. It is to prevent the main switch from malfunctioning and cause unnecessary power outages. Some users and friends also use it in combination with safety barriers to limit the energy on the loop to be lower than the energy for igniting explosive dangerous objects to prevent explosion.