Selection of the encoder of the cable-type displacement sensor

Selection of the encoder of the cable-type displacement sensor

Nowadays, the application range of the rope displacement sensor is wider and wider, and the range is also varied and the models are various. So what is the range of the most widely used rope displacement sensor? Which model is it?

The editor of okplazas.com will introduce today according to the applicable scope and installation situation of the tensile displacement sensor.

1. There are many equipment suitable for rope displacement sensor, the most used are electronic universal testing machine, hydraulic press, forging press and welding and cutting machinery, and the universal range of these equipment is within the range of 0-1000mm.

2. Nowadays, the requirements for location occupancy are getting higher and higher. The smaller the equipment, the better, so in order to reduce the size of the equipment, the smaller the required accessories, the better.

3. Because the cable pull displacement sensor has a wide range of applications, but the equipment design is not necessarily the same, so in order to not be particularly troublesome during actual installation, we have two-sided mounting holes and an L-shaped bracket. The slider uses a through hole plus thread design to suit various installation situations.

4. In order to improve the high-precision setting of the equipment, it is best to use PLC and single chip microcomputer to cooperate with industrial computer to collect. Generally, the signals that PLC and single chip need to collect are incremental pulse signals. The PLC default is to receive push signals. Pull signal, and the one-chip computer defaults to receive the long-line drive signal.

5. Pull-wire displacement sensors with pulse signals are referred to as pull-wire encoders or pull-wire encoders in our industry, and some are called pull-wire spin knitting or pull-wire spin knitting.

Combined with the previous part, the model we concluded is the LS-XF04-P1000 series