What causes the missing pulses of the rotary encoder

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

1. Exceeds the response frequency of the encoder or subsequent equipment

2. The wire is extended too long

3. Encoder hardware problem

4. There is jitter or interference in the field environment

5. There is looseness between the encoder and the motor shaft, not fixed tightly, and there is an eccentric deflection angle