1024 encoder

The 1024 in the 1024 encoder refers to the number of output 1024 pulses per revolution, then the 1024 encoder is an encoder that outputs 1024 pulses per revolution. In a narrow sense, it generally refers to an incremental encoder that outputs 1024 pulses per revolution. Shanghai Kaidi Electronics Co., Ltd. provides 1024 encoders of multiple brands and models. Let's give you an example with the 1024 encoder of Rennes brand. Rennes brand 1024 encoder: RCI90C HS12 1024

The RCI90C-HS12-1024 encoder is an incremental photoelectric encoder under the Rennes brand. It is mainly used to accurately measure the speed of the rotating shaft. The position is in an industrial environment, such as motors, steel mills, machine tools, etc...

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

The RCI90C-HS12-1024 encoder uses differential optical measurement and signal ratio processing to minimize temperature and photodiode aging effects; the encoder has a more accurate measurement, and at the same time, a longer life.

The conventional model, with universal complementary push-pull output interface and large supply voltage range, makes it very easy to connect to most electronic control units with high noise immunity.

Main features of RCI90C-HS12-1024 encoder:

• Hollow shaft, main diameter Ø40 (20, 25, 30 can be customized)

•Case diameter: 90mm

• Housing material: aluminum-zinc alloy

• Shaft: stainless steel

• Pulse per revolution: 1024

• Output signal: A, B, Z

• Connection: cable, M23, MS310

•Working temperature: -25----+80℃

RCI90C-HS12-1024 encoder electrical parameters:

• Supply voltage: 5-30Vdc

• No load current: 100mA at 4-5V, 25mA at 24V

• Output signal: general push-pull type with short circuit protection, RS422 compatible with 5V supply voltage

• Maximum output frequency: 300KHz

• Maximum load current: 20mA

•EMC: EN 61000-6-2 EN 61000-6-4

Mechanical parameters of RCI90C-HS12-1024 encoder:

• Weight 0,700 kg Maximum continuous speed: 3000rpm

•Starting torque≤30N.cm

• Shaft inertia: 970 gr.cm2

•Weight: 0.56 kg

•Protection level: ip65 at the housing, shaft entrance: ip64

•Maximum shock resistance: 100 g, 6 ms (IEC 68-2-27)

• Anti-interference: 10 g, 10-2000 Hz (IEC 68-2-6)

If you need to choose a 1024 encoder, and other parameters are still uncertain, you can find online customer service to contact our engineers to help you choose the model.