How to install the potentiometer What should be paid attention to How to install the potentiometer? 1. When the potentiometer is installed on the panel with a nut, be very careful when tightening the nut. The tightening torque should not be too tight to avoid damage to the thread.

How to judge that the electrical fault is a potentiometer fault and how to repair it Potentiometer is an electronic component commonly used in circuits. When it is used frequently, it sometimes fails, and the product cannot be used, such as:

How to judge that the encoder is damaged An encoder is a sensor device that can be used to calculate distance, displacement, angle, and speed. The encoder can compile and convert signals or data into equipment that can be used for communication, transmission and storage.

How to use a digital potentiometer to eliminate voltage changes How to use the digital potentiometer to eliminate the voltage change? The editor of okplazas.com found some technical posts shared by technical people from the Internet. If it is suitable for use, just follow it~

How to use the potentiometer correctly The potentiometer is a resistance element with three lead-out ends and the resistance value can be adjusted according to a certain change rule. The potentiometer is usually composed of a resistor and a movable brush.

Magnetic encoder structure and working principle of magnetic encoder The magnetic encoder is a new type of sensor device used to measure the angle, displacement, speed and distance. Today, let's take a look at the structure of the magnetic encoder and the working principle of the magnetic encoder.

Potentiometer resistance linear relationship When we select the potentiometer, we will ask to choose the resistance and linearity of the potentiometer. Some customers and friends are not very clear about the concept of linearity. This article will tell you about the relationship between the resistance of the potentiometer and the changes that have occurred to help you Understand this concept.

Potentiometer welding technology sharing Since the solder tabs or leads of the potentiometer terminal are relatively short, it is necessary to pay attention to the heating temperature not to be too high when soldering in the miniaturized printed circuit board or hybrid integrated circuit. 350. C, time 35, 270. C, time 5s).

Precautions for installing and using the encoder Encoder is a kind of precision electronic component, a sensor device that can be used to measure displacement, distance, speed and angle. The encoder can perform functions such as increment, decrement and page turning through cooperation with IC.

Rotary encoder daily maintenance and maintenance work experience sharing Rotary encoder is a speed, angle, displacement and distance feedback sensor. It is mainly used in servo motors, asynchronous motors, stepping motors, elevator traction machines, elevator door machines and even mechanical shafts that require feedback on movement speed and displacement information.