What are the advantages and disadvantages of vacuum generators and vacuum pumps
What are the advantages and disadvantages of vacuum generators and vacuum pumps
What are the advantages and disadvantages of vacuum generators and vacuum pumps
1. Vacuum generator: The vacuum suction cup can be calculated according to -0.5 atmospheres, that is, 0.5KG/CM2==5G/MM2, and it is easy to cause waste if the suction is too large.
2. Vacuum pump: generally can reach -0.9 atmospheres or more.
(1) Where there is compressed air, it is a good way to use a vacuum generator to generate vacuum.
(2)What is unreasonable is that in order to achieve this kind of vacuum, an air compressor and a vacuum generator are specially used.

3. Micro vacuum pump, micro air pump, micro negative pressure pump, oil-free, maintenance-free, can be widely used in industrial automation equipment such as manipulators, chip adsorbers, printing presses, etc.
4. Regarding the release of the vacuum pump after the object is sucked in. After the pump is stopped, the object may not fall off immediately, because the pump has a certain pressure holding capacity after the pump is stopped, and the vacuum generator will continue to maintain for a while.
5.Insufficient micro vacuum pump: Although it is oil-free, you are not afraid of pumping moist gas, but the gas must be clean and dust-free, otherwise you will increase the filter, otherwise, the dust in the pump will accumulate and cause the suction to drop.

6. Insufficient vacuum generator: The vacuum generator adopts a pipeline design, which produces relatively less vacuum at the speed of compressed air, and consumes more compressed air, while the air compressor consumes more power. The vacuum generator with the same flow rate, the vacuum generator Energy consumption is 3-5 times higher than that of vacuum pumps, so factories are not suitable for large-scale use of vacuum generators, which is not conducive to energy saving.