How to adjust and use the encoder coupling

How to adjust and use the encoder coupling?

The encoder connector is a special connector that connects the motor and the encoder. When choosing an encoder coupling, it will consider its performance, service life, reliability and whether there is noise, etc., but there are still unsatisfactory places in use.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

The encoder coupling is an integrally formed metal elastic coupling. The small torque shaft combination, zero rotation gap, encoder coupling production has many advantages, and the machining accuracy is high. How to adjust and use the encoder coupling?

1. The structure is complicated, and it is difficult to adjust and maintain the machine.

2. Low efficiency, slow movement speed and low production efficiency. For high-speed small encoder couplings, it is not as simple and flexible as a crankshaft press.

3. Encoder coupling due to manufacturing, installation, load deformation, temperature change and other reasons, after installation and adjustment, it is difficult to set the two shafts strictly and correctly.

The quality of the encoder coupling directly affects the working efficiency between the two shafts. Therefore, the structure is improved. The self-aligning structure of the rotor relative to the stator is designed, and some parts are redesigned and related experiments are carried out. The results show that the improved encoder coupling is greatly reduced, the main performance indicators are greatly optimized, the cost is reduced, and it has greater promotion and application value.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

How to adjust and use the encoder coupling? When the coupling of the encoder becomes poor, there will be a runaway phenomenon. In severe cases, the damaged parts will automatically go out. When the controller sends an instruction, the driver drives the motor to reach the target position (or speed). If there is a problem, even if the target position (or speed) has been reached, if the feedback value of the encoder does not reach the target position (or speed), the drive will accelerate the motor.

If the encoder coupling is damaged, the following results may occur.

1. The device cannot be rotated

2. The measurement result of the encoder is incorrect

3. Cause the rotation axis of the coupling to shift, damage the code disk, and discard the encoder.