What are the main requirements for designing a cylinder

In a piston compressor, the cylinder is the main part of the compressor volume. According to the pressure and displacement of the compressor, the structure of the compressor, the type of compressed gas, the material of the cylinder and the habits of the manufacturer, the structure of the cylinder can have many forms. The main requirements for designing the cylinder are as follows:

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

(1) The cylinder should have sufficient strength and rigidity, and the working surface should have good wear resistance;

(2) There should be good cooling, and the working surface should be in a good lubrication state;

(3)Minimize the clearance volume and gas resistance in the cylinder as much as possible;

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

(4) The connection and sealing of the connection part should be reliable;

(5) Good manufacturing process performance, easy to disassemble and assemble;

(6) The dimensions of cylinder diameter and valve seat mounting holes should meet the requirements of "three modernizations".