What taboos should be paid attention to when using filters

In order to prevent the filter cup of pneumatic components from being damaged by external force, do not install it beside the passage of transportation vehicles, or set up guard rails.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

The water cup of the pneumatic element filter is made of polycarbonate, so it cannot be used in the atmosphere such as synthetic oil, organic solvents, chemicals, cutting oil, alkali, threaded fasteners, etc., and where the above substances adhere, and avoid sunlight.

Encoder|Transmitter|Soft starter|Power supply|VFD|Light curtain|Servo products|Human-machine interface|Solenoid valve|Cylinder|Actuator|Flow meter|Transformer|Thyristor|Sensor|Deceleration drive gearbox reducer|Linear guide|Circuit breaker|Refrigeration compressorAll industrial products of okplazas are purchased from the original factory or formal channels of agents to ensure the original authenticity, which perfectly solves the problem of industrial product sample procurement and small-batch procurement for the majority of engineers and purchasing personnel.

Pay attention to the regular drainage of the water cup. Once the water level exceeds the baffle, the filtered sewage will be brought into the downstream compressed air again, causing secondary pollution. In order to ensure the filtering effect, the filter element should be cleaned or replaced regularly. Please check the plastic cup of the filter regularly for cracks, damage and other aging phenomena. The water cup is installed vertically with the water cup down. In order to facilitate maintenance, it is necessary to leave a proper space around it. The installation height of the pneumatic element filter should be based on the removable filter cup. Can not be installed near the air compressor, try to install near various pneumatic components.