ASCO analyzes the use of pneumatic cylinders
Cylinder is also an important part of pneumatic components. In order to ensure the normal operation of the cylinder and prevent unnecessary situations, today we will talk about the use of the cylinder in pneumatic components.

What are the main requirements for designing a cylinder
In a piston compressor, the cylinder is the main part of the compressor volume. According to the pressure and displacement of the compressor, the structure of the compressor, the type of compressed gas, the material of the cylinder and the habits of the manufacturer, the structure of the cylinder can have many forms. The main requirements for designing the cylinder are as follows:

Skyco introduces you to the types and functions of cylinders
According to the way the piston bears the gas pressure, the cylinder is divided into a single-acting cylinder and a double-acting cylinder.
1) Single-acting cylinder: The piston of the cylinder is only pushed by the air pressure in one direction, and external force or internal spring force is required when changing direction.
2)Double-acting cylinder: The piston of the cylinder is pushed by the positive and negative directions of the air pressure to achieve reciprocating motion.

What are the physical detection methods of engine cylinders
The purpose of internal combustion engine cylinder inspection is to determine the degree of wear between the piston ring and the cylinder and the sealing between the cylinder and the piston, the valve and the valve seat, and the cylinder liner. During operation, due to wear, ablation, gluing, carbon deposits and other reasons, the technical condition of the cylinder piston assembly deteriorates, resulting in poor cylinder sealing and reduced engine power and economy. Today, the staff choose to use an endoscope to perform real-time on-site inspection of the engine cylinder piston to solve the problem in a timely manner.

What are the working principles of the cylinder
The cylinder is a cylindrical metal part that guides the piston to reciprocate in a straight line in the cylinder. The air in the engine cylinder expands to convert thermal energy into mechanical energy; the gas is compressed by the piston in the compressor cylinder and increases pressure. The casing of turbines, rotary piston engines, etc. are also called cylinders

How to install the pulse solenoid valve
When many instruments are in use, solenoid valves are always used in different places. The pulse solenoid valve is the compressed air "switch" of the soot blowing system of the pulse bag filter.
　　 So how to install the solenoid valve correctly? Here are a few steps:
　　 1. In order to ensure the normal use of the solenoid valve, please add an oil-water separator before the solenoid valve.
2.The good installation method of solenoid valve is perpendicular to the horizontal pipe with the coil upward. When conditions do not permit, tilt ±30 degrees is allowed. Otherwise, normal use cannot be guaranteed.

Sharing of the working principle of AVENTICS cylinder
As a pneumatic actuator, the AVENTICS cylinder generates energy conversion through air compression to generate power energy. How does the AVENTICS cylinder work? What is its structure? How does it work?
　　 Pneumatic actuator is an energy conversion device that converts the pressure energy of compressed air into mechanical energy to drive the tissue to complete linear reciprocating motion, swing, rotation or impact. Pneumatic performance components are divided into two categories: cylinders and gas motors. The cylinder is used to provide linear reciprocating motion or swing, output force and linear velocity or swing angular displacement. Air motors are used to provide continuous reverse motion, output torque and speed. Pneumatic control components are used to adjust the pressure, flow and direction of the compressed air to ensure that the performance organization operates normally in accordance w

What should I do if the vacuum sucker can't suck things
What should I do if the vacuum suction cup cannot suck things?

First of all, check whether the vacuum suction cup is intact, whether the vacuum

What are the working principles of vacuum generators
The working principle of the vacuum generator is that when the compressed air enters the interior from the nozzle through the narrow nozzle, it accelerates, so that it passes through the diffusion chamber faster, and accelerates the diffusion in the diffusion chamber, and at the same time promotes the rapid outflow of indoor air. In addition, due to the spread of indoor air and the rapid outflow of compressed air, a vacuum effect is generated at the moment of indoor spreading. When the vacuum line enters the vacuum cleaner vacuum generator, it can be used for vacuum line extraction.
After the air in the diffusion chamber flows out from the diffusion chamber together with the compressed air and passes through the diffuser, as the air circulation space gradually increases, the air pressure from the exhaust port drops rapidly and integrates into the surrounding air. At the same time, due to the large

Structural classification of photoelectric switches Keywords: photoelectric switch photoelectric switch manufacturer photoelectric switch model photoelectric switch price photoelectric switch wiring diagram photoelectric switch principle photoelectric switch type photoelectric switch application